Products list
NETCOM POE which is designed specifically for Telecom carrier . The device implemented advanced MCU control technology. Total power, individual port power, port status and device temperature are displayed on LCD real time. And it has efficient protection of each port. It is used with wireless AP, IP cameras, VOIP and other device that needs network and power supply.
Features and functions
1. LCD display and control panel, display the total power, power of each port, the device temperature, etc. ( only for 8 port POE)
2. The entire device or any single port reset ( only for 8 port POE)
3. The POE and UPLINK port support automatic MDI/MDI-X function
4. Supply 4 or 8 POE power port, one UPLINK port
5. 10/100Mbps, full/half duplex automatic adapt
6. Compliant with IEEE802.3af, IEEE802.3at standard, 25W Max per port
7. Backplane switching capacity of 1.0Gbps
8. 2K MAC address list
9. Extend the cable transmit distance, furthest to 300m. ( only for 4 port POE)
10. Effective short circuit, overload and total power protection
11. Each port with indicator light, alarm light, device alarm light
12. Metal case, with wall mounting hole
Technical features and Specifications
IEEE standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet |
switching structure |
Back-plane( switch ):1.0Gbps Transfer Rate: 14,880pps for Ethernet port 148,800pps for Fast Ethernet port |
Transmit rate |
Ethernet :10Mbps half duplex,20Mbps full duplex Fast Ethernet:100Mbps half duplex,200Mbps full duplex |
Mac address |
2K MAC address list |
interface |
10/100TX:RJ-45,all ports support automatic MDI/MDI-Xfunction 4 port POE or 8 port POE |
Port protection |
Effective short circut ,overload and total power protection |
Cable type and distance |
10BASE-T: CAT 3,4,5 UTP (maximum length 100m ) EIA/TIA-568 100 OHM STP(maximum length 100m) 100BASE-TX: CAT 5E UTP(maximum length 100m) EIA/TIA-568 100 OHM STP (maximum length 100m) |
Cable extend distance |
200m (only for POE04 switch ) |
POE PINs |
Support A B mode Positive (VCC+):RJ-45 pin 1,2,4,5 Negative (VCC-):RJ-45 pin 3,6,7,8 Data (1,2,3,6) |
Protocols |
CSMA/CD |
Power supply |
External Power Adaptor (POE04) (100V-240V AC 50Hz-60Hz, DC48V/ 2.5A) Internal power adaptor (POE08) (200V-240V AC 2A 50Hz-60Hz) |
Overcurrent protection |
Implemented |
Storage temperature |
-20°C-+70°C |
Operating temperature |
-10℃ ~+ 50℃ 5%~95% Non-condensing |
Dimensions and weight:
|
NETCOM POE01 |
NETCOM POE04 |
NETCOM POE08 |
Width |
58mm |
155.6mm |
270mm |
Height |
38mm |
26mm |
44mm |
Depth |
120mm |
71.4mm |
170mm |
Weight |
<0.3kg |
<0.5kg |
<3kg |