Products list
7 inch HD SDI tester
Features
1. English/Chinese/Spanish /Italian / French /German /Russian ,more than 8 languages
2. 7 inch LCD screen display,800*600 resolution
3. HD SDI digital camera image display and video output ,Support resolution 1080P(25,30,50,60Hz)and 720P(25,30,50,60Hz)
4. VGA signal input display, convenient to DVR / NVR setting NEW
5. DC12V 2A power output for camera NEW
6. USB 5V 2A power out, as a power bank NEW
7. LED Lamp,easy to operate at night
8. Micro SD card moveable
9. User-defined shortcut keys(F1 and F2)
10. LCD screen brightness/contrast/color Saturation adjustable
11. Auto-adapt and displays the video format of NTSC/PA
12. Enhanced color bar generator, by receiving the video color bar to test the video channel whether transmit normally
13. Optical Power Meter, it test the optical power value and fiber loss*(Optional)
14. Digital Multi-meter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing (Optional)
15. TDR cable tester ,cable length and short – circuit measurement( BNC cable, network cable etc) *(Optional)
16. Visual fault locator , to test fiber’s bending and breakage * (Optional)
17. Cable scan, Send the specific signal, easy to find the connected cable from the mess cable.
18. 4xzoom,video image can be magnified to view the details, easy to use (only for analog video test)
19. Video record and playback (only for analog video test)
20. Snapshot and save the current image as JPG file in the SD card(only for analog video test)
18. PING testing,test IP camera or other network devices’ Ethernet port whether work normally, and the IP address whether right
19. Video signal level test
20. Video level meter ,PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement *
21. IP address scan, quickly search the IP address for the connected IP camera and other network devices
22. POE voltage measurement,test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
23. Port flicker,easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency.
24. Link test, check the setting IP address whether occupied.
25. PTZ address scan, search up the ID of PTZ camera.
26. Network cable and Telephone cable testing, display the sequence of connection and the NO of the LAN cable
27. Support RS232/RS485/RS422,Rate 600 ~ 115200bps adjustable
28. Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,
SAMSUNG
29. PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
30. PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position
31. Audio input test, test the audio signal from pickup devices
32. Lithium Ion Polymer Battery .The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 17 hours for normal use after charging for 7 -8 hours
Specifications
Model |
HVT-3600S |
|||
SDI digital Video Signal |
||||
Video IN/OUT |
1 channel SDI IN BNC& 1 channel Output, support resolution 1080P(25,30,50,60Hz )and 720(25,30,50,60Hz) |
|||
HDMI digital Video Signal * (If tester with SDI ,without HDMI) |
||||
digital Signal in |
1 channel HDMI in,support 1080P,720P |
|||
Video Test |
||||
Signal mode |
NTSC/PAL (Auto adapt) |
|||
Video Output Mode |
1.0 Vp-p |
|||
Display |
7inch TFT-LCD, 800(RGB)×600 resolution |
|||
LCD adjustment |
Brightness, Contrast, Saturation adjustable |
|||
Video IN/OUT |
1 channel BNC Input & 1 channel Output |
|||
VGA input display |
||||
VGA input display |
Receive DVR,NVR VGA signal |
|||
Video Level test |
||||
Level test |
Video signals measured in IRE or mV |
|||
Video Level meter |
||||
Video Level meter |
PEAK video signal level, SYNC signal level, Color burst chroma level measurement |
|||
DC12V 2A power output |
||||
DC12V power output |
Output DC12V/2A power for camera |
|||
5V power output |
||||
Power output |
Output 5V power for phone as power bank |
|||
Audio input test |
||||
Audio input test |
1 channel audio signal input to test pickup device, 1 channel audio signal output to connect headphone |
|||
PTZ controller |
||||
Communication |
Support RS232 and RS485 |
|||
PTZ Protocol |
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
|||
Baud Rate |
600,1200,2400,4800,9600,19200,57600,115200bps |
|||
Video Signal Generation |
||||
Color bar generator |
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) |
|||
UTP Cable tester |
||||
UTP cable test |
Test UTP cable connection status and display on the screen. Read the number of the test box. |
|||
RS485 /232data analysis |
||||
Data Monitor |
Captures and analyzes the command data from controlling device |
|||
10x Zoom Image |
||||
Image 10x zoom |
10x zoom image display and video out |
|||
Photograph,Video record, Record playback |
||||
Photograph |
snapshot and save the current image as JPG file |
|||
Video record |
Video record and storage the file |
|||
Record playback |
To view the storage file in the SD card |
|||
Port flicker |
||||
Port finder |
Find the connected POE port quickly. |
|||
IP scan,Link test,PING test |
||||
IP scan |
Find out the connected IP camera or the other network equipment IP address quickly. |
|||
Link test |
Check the IP address whether is occupied |
|||
PING testing |
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address |
|||
Cable scan |
||||
Cable scan |
Search the cable by the audio signal |
|||
PoE test |
||||
PoE test |
Display the power supply voltage and cable connection states |
|||
Digital Multimeter *(Optional) |
||||
AC/DC Voltage |
0-660V auto/manual range, the min resolution is 0.1mV |
|||
AC/DC current |
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A |
|||
Resistance |
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ |
|||
Capacitance |
6.6nf~66000uF, the min resolution is 1pf |
|||
Diode |
0~2V forward voltage, the min resolution is 1mV |
|||
Data hold |
||||
Relative measurement |
Display the relative power value |
|||
Continuity testing |
Built-in buzzer will sound, if resistance is lower than 30Ω |
|||
Testing speed |
3 times/ seconds |
|||
Data range |
-6600~+6600 |
|||
Optical power meter **(Optional) |
||||
Calibrated Wavelength(nm) |
850/1300/1310/1490/1550/1625nm |
|||
Power range(dBm) |
-70~+10dBm |
|||
Sensitivity(nW) |
0.001nW |
|||
Connector type |
FC/PC |
|||
Data hold |
Hold and display the measured value |
|||
Relative measurement |
||||
Visual fault locator **(Optional) |
||||
Visual fault locator |
Test fiber’s bending and breakage ( SM and MM fiber) |
|||
TDR Test**(Optional) |
||||
TDR Test |
Cable length and short circuit measurement(BNC cable, telephone cable) |
|||
POWER |
||||
Power Adapter |
DC 5V(2A) |
|||
Battery |
Built-in 7.4V Lithium polymer battery ,6500mAh |
|||
Rechargeable |
After charging 6-8 hour, working time lasts 17 hours |
|||
Low Consumption |
Energy saving technology, the battery icon real-time display |
|||
Parameter |
||||
Operation setting |
English/Chinese and other languages OSD menu |
|||
Auto off |
5-60 (mins) |
|||
Keytone |
On/Off |
|||
General |
||||
WorkingTemperature |
-10℃ ~+50℃ |
|||
Working Humidity |
30%~ 90% |
|||
Dimension/Weight |
256mm x 173mm x 50mm / 1.2kg |