Midspan PSE power supply PSE 8,12 and 16 Port

Features and functions

NETCOM POE which is designed specifically for Telecom carrier. The device implemented more sufficient and advanced MCU control technology. Total power, individual port power, port status and device temperature are displayed on LCD real time. And it has efficient protection of each port. It is used with wireless AP, IP cameras, VOIP and other device that needs network and power supply.

² LCD display and control panel, display the total power, power of each port, the working temperature, etc.

² The entire device or any single port reset

² Extensive status indication. ALARM: general alarm indicator, if any failure of equipment, ALARM red lights flash; working status indication for each port, it turns green when normal, abnormal blinking.

² More effective protection circuit. Output protection on each port, short circuit, overload protection. When any power output short circuit or overload, the protect circuit is active, and the corresponding alarm indicator light flashes. Meanwhile all other output port is not affected.

² Total power overload protection. When sum of all port power is over the total power limit; to ensure that the device work normally, it will shut off the power port of high port number. This ensure that the equipment will not exceed the total power ,otherwise will caused the entire device to stop working.

² The device support 8-16 port, output 25W max per port.

² Lightning protection characteristic: AC input, can endure 5KA, 8/20uS current pulse of positive and negative 5 times each, time interval 1 minute; lightning protection circuit has a failure alarm function, insurance management and other security components

² System reliability MTBF>100k hours

Operating environment

(1) Ambient temperature：-5℃～+55℃

(2) Relative Humidity：5%～90%RH

(3) The occasion of Ventilation and heat- dispersion, clean, no conductive dust, no corrosive gas

Technical features and parameters

(1) Input Voltage：165VAC～280VAC，47Hz～63Hz。

(2) Maximum power output：

NETCOM PSE16A：Total power300W；Single port output power：25W max

NETCOM PSE12A：Total power 300W；Single port output power：25W max

NETCOM PSE16：Total power 150W；Single port output power：25W max

NETCOM PSE12：Total power 150W；Single port output power：25W max

NETCOM PSE08：Total power 150W；Single port output power：25W max

NETCOM PSE04：Total power 100W；Single port output power：25W max

NETCOM PSE01：Total power 36W ；Single port output power：25W max

(3) Each output voltage / current：48VDC/520mA（MAX）。the total channels of power：

NETCOM PSE16：16 port

NETCOM PSE12：12 port

NETCOM PSE08：8 port

NETCOM PSE04：4 port

NETCOM PSE01：1port

(4) Output voltage accuracy：48VDC±5%

(5) Load regulation：48VDC±5%

(6) Operating temperature range：-5℃～+55℃

(7) DC(direct current) output noise voltage：

Wideband noise voltage：

3.4kHz～150kHz≤50mv

0.15MHz～30MHz≤20mv

Discrete noise voltage：

3.4KHz～150KHz≤5mv

150KHz～200KHz≤3mv

200KHz～500KHz≤2mv

0.5MHz～30MHz≤1mv

Dimensions and weight：

NETCOM PSE series protect function：

Range of output over-voltage protection：53VDC～55VDC

Over current protection (single channel)：750mA～1000mA

Over voltage protection：Input voltage is over 290VAC～310VAC

Over voltage recovery point：Input voltage is over 285VAC

low voltage protection：Input voltage is less 140VAC～155VAC

Voltage recovery point：Input voltage is less 165VAC

Over-temperature protection：＞100℃