The CCTV testerPRO STest-894 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video level, controlling PTZ, scanning PTZ address, generating images, capturing data of RS485 and testing LAN cable etc. Its functions, easy operation, and portability makes it simple for the CCTV technician to install and maintain CCTV system, improving work efficiency and get the labor cost down.

Application:
1.CCTV system installation and maintenance   
2.Dome camera and All in one camera testing          
3.The CCTV transmitting channel testing
4.PTZ controller
　

FEATURES

3.5"TFT-LCD , 960（H）×240（V）resolution

Digital Multimeter, performs AD/DC Voltage, AC/DC Current, Resistor, Conductivity, Capacitor and Diode test.

DC12V power output

Audio input

Adjustable brightness, contrast, color of LCD

Video Level testing, video signals measured in IRE or mV

Automatically identify and adapt the video mode of NTSC and PAL

Colorbar Video signal generator, transmit/receive colorful images

Support more than twenty kinds of PTZ controller protocols. For example, PELCO-P, PELCO-D, SAMSUNG etc.

PPTZ address scanning, search up the ID of PTZ camera.

Capture the PTZ protocol to assist the setting personnel to find out the control protocol and therefore easily target the problematic equipment.

Support RS232 and RS485 interface, the rate 150-19200bps

Powerful in testing LAN cable, measuring the connecting status and displaying the sequence of connection

PTZ(P/L & Zoom) Control: Control the status of P/L, zoom in/out the camera, adjust the aperture, foci and setting parameters, run and call the preset.

Lithium Ion Polymer Batteries(3.7V DC3000mAh), more reliable, and work 15 hours   

Easy for use that the train is almost unnecessary

Spre

MODEL

CCTV Security TesterPRO

Video Test

Signal mode

NTSC/PAL (Auto adapt)

Display

3.5 inch digital TFT-LCD ,960 x 240 resolution

LCD adjustment

Brightness, Contrast, Saturation adjustable

Video IN/OUT

1 channel BNC Input & 1 channel Output

Video Output Mode

1.0 Vp-p

Video Level test

Level test

Video signals measured in IRE or mV

PTZ controller

Communication

RS232, RS422 simplex and RS485

PTZ Protocol

Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.

Baud Rate

150,300,600,1200,2400,4800,9600,19200bps

Video Signal Generation

Color bar generation

Output one channel PAL/NTSC colorbar video signal for testing monitor or video cable.

Digital multimeter

Multimeter

Voltage, current, resistance and capacitance measuring, continuity testing, diode testing.

UTP CABLE TEST

UTP cable test

Test UTP cable connection status and display in the screen. Read the number of the test box.

DC12V 1A power output

DC12V power output

 Output DC12V1A power for camera

Audio input test

Audio input test

test the pickup and other audio equipments on the front-end

RS485 data analyst

Data Monitor

Captures and analyzes the command data from controlling device

POWER

Power Adapter

DC5V, 2A

Battery

Built-in 3.7V Lithium polymer battery ,3000mAh

Rechargeable

After charging 3-4 hour, working time lasts 12 hours

Low Consumption

Energy saving technology

General

Working Temperature

-10℃---+50℃

Working Humidity

30%-90%

Dimension/Weight

176mmx94mmx36mm/340g [i]